Send a Message

Contact Us

Company Address

Zhengzhou, China.

(PDF) EXPERIMENTAL STUDY ON REPLACEMENT OF FINE

Hence the use of Bamboo and quarry dust as replacement for coarse aggregate and fine aggregate in concrete is reducing the Environmental wastes which pose a difficult problem in its disposal. A

Study on Partial Replacement of Fine Aggregate by Quarry

replacement of fine aggregate replacements varies as 0,25,50,75% of riversand. The study explains that quarry dust has required properties of fine aggregate and 50% of quarry dust can be replaced in sand to produce optimum strength of concrete. 25% replacement of quarrydust with fine aggregate gives same strength values as control mix

EXPERIMENTAL STUDY ON REPLACEMENT OF FINE

Phase 1: Replacement for fine aggregates Phase 2: Replacement of Binders Phase 3: Replacement of Coarse Aggregates Presently the research work is preceding on Phase 1: Replacement of conventional fine aggregate (sand) by Quarry dust. Following are the step has to be carried out in the experimental studies of phase 1. 1. Sieve analysis of QD 2.

Partial Replacement of Fine Aggregates with Quarry Dust

alternative to fine aggregate in concrete. In the present investigation workability and strength of concrete was evaluated by replacement of natural sand by Quarry dust and marble powder in equal proportions of 0%, 10%, 20%,

(PDF) Use of Quarry Fine as Partial Replacement of

These include: flexural strength, tensile strength, shear strength, water absorption, resistance to Use of Quarry Fine as Partial Replacement of Concrete as a Replacement of Fine Aggregate in Concrete (Evaluation of Workability and Compressive Strength) (IJSRD/Vol. 2/Issue 07/2014/038)

Studies on Quarry Dust as Partial Replacement of Fine

to use Quarry dust to replace the fine aggregates in concrete. Following are some of the conclusions drawn from the results of this investigation: 1. Quarry dust can be used as a finer material which can reduce the voids in concrete. 2. Up to 20% replacement of fine aggregates by quarry dust, the results obtained are satisfactory. 3.

Optimum Mix of Quarry Dust as Partial Replacement of Fine

Quarry Dust is the byproduct produced during the production of coarse aggregates. About 20 to 25 per cent of the total production in each crusher unit is left out as the waste material called

Use of Quarry Fine as Partial Replacement of Concrete as a

combinations of lateritic sand and quarry dust as complete replacement for conventional river sand fine aggregate. Samples of concrete cube were made using varying contents of laterite and quarry dust as fine aggregate. The quantity of laterite was varied from 0% to 100% against quarry

Introduction to Quarry-Dust as Partial Replacement

quarry dust as fine aggregate: effect on compressive strength,durability and workability of concrete. The experimental study done by R Chandana Sukesh, Katakam Bala Krishna, P.Sri Lakshmi Sai Teja, S.Kanakambara Rao.[6] in which replacement of the sand with quarry dust shows an improvement in the compressive strength of the concrete.

Study on Partial Replacement of Fine Aggregate by Quarry

replacement of fine aggregate replacements varies as 0,25,50,75% of riversand. The study explains that quarry dust has required properties of fine aggregate and 50% of quarry dust can be replaced in sand to produce optimum strength of concrete. 25% replacement of quarrydust with fine aggregate gives same strength values as control mix

EXPERIMENTAL STUDY ON REPLACEMENT OF FINE

Phase 1: Replacement for fine aggregates Phase 2: Replacement of Binders Phase 3: Replacement of Coarse Aggregates Presently the research work is preceding on Phase 1: Replacement of conventional fine aggregate (sand) by Quarry dust. Following are the step has to be carried out in the experimental studies of phase 1. 1. Sieve analysis of QD 2.

Investigation on Strength Properties of Concrete by

Partial Replacement of Fine Aggregate by Quarry Dust M. Syam Kumar1, M. Nageswara Rao2 1, 2Amara Institute of Engineering and Technology, Sathuluru Guntur, India Abstract: This work presents the variation in the strength properties of concrete when replacing sand by quarry

Studies on Quarry Dust as Partial Replacement of Fine

to use Quarry dust to replace the fine aggregates in concrete. Following are some of the conclusions drawn from the results of this investigation: 1. Quarry dust can be used as a finer material which can reduce the voids in concrete. 2. Up to 20% replacement of fine aggregates by quarry dust, the results obtained are satisfactory. 3.

PARTIAL REPLACEMENT OF SAND BY QUARRY DUST IN

Quarry dust as fine aggregate gives better result in compressive strength. The previous study also shows the optimum use of quarry dust with a better strength. The concept of replacement of natural fine aggregate (sand) by quarry dust may help in many ways rather than reducing construction cost. The Erosion of river bank might stopped

Introduction to Quarry-Dust as Partial Replacement

quarry dust as fine aggregate: effect on compressive strength,durability and workability of concrete. The experimental study done by R Chandana Sukesh, Katakam Bala Krishna, P.Sri Lakshmi Sai Teja, S.Kanakambara Rao.[6] in which replacement of the sand with quarry dust shows an improvement in the compressive strength of the concrete.

Studies on quarry dust as partial replacement of fine

May 05, 2017 Quarry dust can be used as a finer material which can reduce the voids in concrete. 2. Up to 20% replacement of fine aggregates by quarry dust, the results obtained are satisfactory. 3. From the above results 15% replacement of quarry dust gives high Compressive and Flexural Strength. 4.

Feasibility of Quarry Dust to Replace River Sand as Fine

quarry dust can be effectively used to replace sand and fly ash can improve the performance of concrete with quarry dust as fine aggregate. Keywords: Concrete, Fine aggregate, Quarry dust, River sand, Compressive strength, Shrinkage, Workability. 1. Introduction Concrete is one

BEHAVIOR OF CONCRETE ON REPLACEMENT OF SAND

BEHAVIOR OF CONCRETE ON REPLACEMENT OF SAND WITH QUARRY STONE DUST AS FINE AGGREGATE Venkata Keerthi.B1, J. Sudha Mani2 1M.Tech Student, 2Associate Professor Department Of Civil Engineering, Usharama College Of Engineering And Technology, Telaprolu, Krishna District, Andhra Pradesh, India, 521109.

Suitability of Quarry Dust as a Partial Replacement of

To overcome this problem, present study is focused on the suitability to utilize the quarry dust in Self Compacting Concrete (SCC) partially as fine aggregate with the natural fine aggregates. In this work, quarry dust is used as replacement of sand in a different level (0%, 15%, 30%, 45% and 60%) for producing the SCC.

Experimental Study on Partial Replacement of Fine

Quarry Dust and red soil are replaced as fine aggregate in conventional concrete to achieve High strength. 3. OBJECTIVES Replace the manufactured sand (quarry dust) and red soil with fine aggregate in ordinary Portland cement concrete. Using quarry dust at various proportions like 8%, 12%, 16%, 20% in sand.

A DETAILED STUDY ON PARTIAL REPLACEMENT OF FINE AGGREGATE

The waste bricks as obtained from garbage of a broken building were collected and pulverized to get the particle passing 4.75 mm sieve and retained on 0.075 mm sieve to get the grading of fine aggregate. 5, 10, 15, and 20% brick powder is used as replacement of fine aggregate in the experiments.The aim of the experiment was to assess the

PARTIAL REPLACEMENT OF FINE AGGREGATES WITH

PARTIAL REPLACEMENT OF FINE AGGREGATES WITH QUARRY DUST AND MARBLE POWDER IN CONCRETE MERUVALA BHOPAL1, M.LAKSHMI2 1PG Student, Dept of CIVIL Engineering, SITE, Tirupati, AP, India. 2Assistant Professor, Dept of CIVIL Engineering, SITE, Tirupati, AP, India. Abstract- Quarry dust and Marble powder are the

EFFECT OF FLY ASH AND QUARRY DUST AS A PARTIAL

to study the effect of partial replacement of fine aggregates by quarry dust and cement by fly ash on cement concrete. 1.2 NEED FOR INVESTIGATION Quarry Dust These residues are generally less than 1% aggregate production in the normal concrete. The introduction of quarry dust for mixing is limited due to its high fineness.

PARTIAL REPLACEMENT OF FINE AGGREGATES WITH

PARTIAL REPLACEMENT OF FINE AGGREGATES WITH QUARRY DUST AND MARBLE POWDER IN CONCRETE MERUVALA BHOPAL1, M.LAKSHMI2 1PG Student, Dept of CIVIL Engineering, SITE, Tirupati, AP, India. 2Assistant Professor, Dept of CIVIL Engineering, SITE, Tirupati, AP, India. Abstract- Quarry dust and Marble powder are the

Studies on Quarry Dust as Partial Replacement of Fine

to use Quarry dust to replace the fine aggregates in concrete. Following are some of the conclusions drawn from the results of this investigation: 1. Quarry dust can be used as a finer material which can reduce the voids in concrete. 2. Up to 20% replacement of fine aggregates by quarry dust, the results obtained are satisfactory. 3.

Investigation on Strength Properties of Concrete by

Partial Replacement of Fine Aggregate by Quarry Dust M. Syam Kumar1, M. Nageswara Rao2 1, 2Amara Institute of Engineering and Technology, Sathuluru Guntur, India Abstract: This work presents the variation in the strength properties of concrete when replacing sand by quarry

Studies on quarry dust as partial replacement of fine

May 05, 2017 Quarry dust can be used as a finer material which can reduce the voids in concrete. 2. Up to 20% replacement of fine aggregates by quarry dust, the results obtained are satisfactory. 3. From the above results 15% replacement of quarry dust gives high Compressive and Flexural Strength. 4.

Introduction to Quarry-Dust as Partial Replacement

quarry dust as fine aggregate: effect on compressive strength,durability and workability of concrete. The experimental study done by R Chandana Sukesh, Katakam Bala Krishna, P.Sri Lakshmi Sai Teja, S.Kanakambara Rao.[6] in which replacement of the sand with quarry dust shows an improvement in the compressive strength of the concrete.

Feasibility of Quarry Dust to Replace River Sand as Fine

quarry dust can be effectively used to replace sand and fly ash can improve the performance of concrete with quarry dust as fine aggregate. Keywords: Concrete, Fine aggregate, Quarry dust, River sand, Compressive strength, Shrinkage, Workability. 1. Introduction Concrete is one

Suitability of Quarry Dust as a Partial Replacement of

To overcome this problem, present study is focused on the suitability to utilize the quarry dust in Self Compacting Concrete (SCC) partially as fine aggregate with the natural fine aggregates. In this work, quarry dust is used as replacement of sand in a different level (0%, 15%, 30%, 45% and 60%) for producing the SCC.

Quarry Mud as Partial Replacement for Fine Combination

Aswinpalaniappan, S. and Panneerselvam, G. (2018) Quarry Mud as Partial Replacement for Fine Combination (Sand) in Concrete. Open Access Library Journal, 5, 1-15. doi

A DETAILED STUDY ON PARTIAL REPLACEMENT OF FINE AGGREGATE

The waste bricks as obtained from garbage of a broken building were collected and pulverized to get the particle passing 4.75 mm sieve and retained on 0.075 mm sieve to get the grading of fine aggregate. 5, 10, 15, and 20% brick powder is used as replacement of fine aggregate in the experiments.The aim of the experiment was to assess the

What are the Materials for Replacement of Sand in Concrete

Crusher dust (quarry waste) is by product of stone crushers while producing coarse aggregate. Instead of disposing them in landfills, it can be best utilized as partial replacement to sand. In crusher dust, the particles (% finer than 150 microns) are generally high, a major concern limiting its percentage replacement to minimum with sand in a

EXPERIMENTAL STUDY ON CEMENT BRICK WITH PARTIAL

replacement of fine aggregate by saw dust and quarry dust has been done. As the natural sand is replaced by saw dust and quarry dust the usage of sand is reasonably reduced in the environment and saw dust and quarry dust is effectively used. Results of experiments on compressive strength, water

IOP Conference Series: Materials Science and Engineering

Abstract: The replacement of natural fine aggregate by using quarry dust leads to consumption of generated quarry dust, the requirement of land fill area can be reduced and solves the natural sand scarcity problem. The sand availability as a fine aggregate at low cost which needs the reason to search as a alternative material.

Quarry Dust As Fine Aggregate In Concrete

Experimental Study on Use of Quarry Dust and Fly Ash with . aggregates In this experimental study an attempt will be made to find the effect of partial replacement of Fine aggregate by Quarry Dust and Cement by Fly ash The innovative use of Quarry Dust in concrete formulations as a fine aggregate replacement in the range of 0% 15% 30% 45% by weight for M-40 grade cement (PPC)

Experimental Study on Concrete and Cement Plaster Using

quarry dust as a replacement to fine aggregate. During the present study, 0%, 50%, 75% and 100% of traditional fine aggregate was replaced with quarry dust. Compression, split and flexural strengths were found after 7days and 28 days of curing. Key words: Fine Aggregate, Portland Cement I. INTRODUCTION